for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com frequency dividers & detectors - smt 4 4 - 84 general description features functional diagram the HMC437MS8G & HMC437MS8Ge are low noise divide-by-3 static dividers utilizing ingap gaas hbt technology in low cost 8 lead surface mount plastic packages. this device operates from dc (with a square wave input) to 7 ghz input frequency from a single +5v dc supply. the low additive ssb phase noise of -153 dbc/hz at 100 khz offset helps the user maintain good system noise performance. ssb phase noise: -153 dbc/hz @100khz wide bandwidth output power: -1 dbm single dc supply: +5v @ 69 ma ms8g smt package electrical specifi cations, t a = +25 c, 50 ohm system, vcc= 5v typical applications prescaler for dc to c band pll applications: ? unii, point-to-point & vsat radios ? 802.11a & hiperlan wlan ? fiber optic ? cellular / 3g infrastructure parameter conditions min. typ. max. units maximum input frequency 7.0 7. 5 g hz minimum input frequency sine wave input [1] 0.1 ghz input power range fin= 1 to 6 ghz -12 +12 dbm fin= 6 to 7 ghz -10 +10 dbm output power -4 -1 dbm reverse leakage both rf outputs terminated -50 dbm ssb phase noise (100 khz offset) pin= 0 dbm, fin= 6 ghz -153 dbc/hz output transition time pin= 0 dbm, fout= 882 mhz 100 ps supply current (icc) 69 ma 1. divider will operate down to dc for square-wave input signal. HMC437MS8G / 437ms8ge smt gaas hbt mmic divide-by-3, dc - 7 ghz v04.0410
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com frequency dividers & detectors - smt 4 4 - 85 -20 -15 -10 -5 0 5 10 15 20 0123456789 input power (dbm) input frequency (ghz) ssb phase noise performance, pin= 0 dbm, fin= 6 ghz, t= 25 c input sensitivity window, t= 25 c input sensitivity window vs. temperature output power vs. temperature recommended operating window reverse leakage, pin= 0 dbm, t= 25 c output harmonic content, pin= 0 dbm, t= 25 c -180 -150 -120 -90 -60 -30 0 10 2 10 3 10 4 10 5 10 6 10 7 ssb phase noise (dbc/hz) offset frequency (hz) -6 -5 -4 -3 -2 -1 0 1 2 3 4 0123456789 +25 c +85 c -40 c output power (dbm) input frequency (ghz) -70 -60 -50 -40 -30 -20 -10 0 0123456789 both output ports terminated one output port terminated output level (dbm) input frequency (ghz) -50 -40 -30 -20 -10 0 0123456789 pfeedthru 2nd harmonic output level (dbm) input frequency (ghz) -20 -15 -10 -5 0 5 10 15 20 0123456789 min pin +25 c max pin +25 c min pin +85 c max pin +85 c min pin -40 c max pin -40 c input power (dbm) input frequency (ghz) HMC437MS8G / 437ms8ge smt gaas hbt mmic divide-by-3, dc - 7 ghz v04.0410
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com frequency dividers & detectors - smt 4 4 - 86 output voltage waveform, pin= 0 dbm, fout= 882 mhz, t= 25 c typical supply current vs. vcc note: divider will operate over full voltage range shown above vcc (v) icc (ma) 4.75 64 5.0 69 5.25 75 dc blocking capacitors are required at rf input and rf output ports. choose value for lowest frequency of operation. electrostatic sensitive device observe handling precautions -500 -400 -300 -200 -100 0 100 200 300 22.5 23 23.5 24 24.5 25 25.5 amplitude (mv) time (ns) HMC437MS8G / 437ms8ge smt gaas hbt mmic divide-by-3, dc - 7 ghz v04.0410 absolute maximum ratings reliability information rf input power (vcc = +5v) 13 dbm nominal +5v supply to gnd -0.3v to +5.5v max peak flow temperature 260 c storage temperature -65 to +125 c esd sensitivity (hbm) class 1a junction temperature to maintain 1 million hour mttf 135 c nominal junction temperature (t = 85 c) 122 c thermal resistance (junction to gnd paddle, 3v supply) 101.5 c/w operating temperature -40 to +85 c
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com frequency dividers & detectors - smt 4 4 - 87 outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. dimension does not include moldflash of 0.15mm per side. 4. dimension does not include moldflash of 0.25mm per side. 5. all ground leads and ground paddle must be soldered to pcb rf ground. HMC437MS8G / 437ms8ge smt gaas hbt mmic divide-by-3, dc - 7 ghz v04.0410 part number package body material lead finish msl rating package marking [3] HMC437MS8G low stress injection molded plastic sn/pb solder msl1 [1] h437 xxxx HMC437MS8Ge rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h437 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information pin number function description interface schematic 1 vcc supply voltage 5v 0.25v. 2 in rf input must be dc blocked. 3 in rf input 180 out of phase with pin 2 for differential operation. ac ground for single ended operation. pin description
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com frequency dividers & detectors - smt 4 4 - 88 application circuit HMC437MS8G / 437ms8ge smt gaas hbt mmic divide-by-3, dc - 7 ghz v04.0410 pin number function description interface schematic 4, 5 gnd all ground leads and ground paddle must be soldered to pcb rf/dc ground. 6 out divided output 180 out of phase with pin 7. 7 out divided output. 8n/c the pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/dc ground externally. pin description (continued)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com frequency dividers & detectors - smt 4 4 - 89 evaluation pcb list of materials for evaluation pcb 105786 [1] item description j1 - j3 pcb mount sma rf connector j4, j5 dc pin c1 - c4 100 pf capacitor, 0402 pkg. c5 10,000 pf capacitor, 0603 pkg. c6 4.7 f tantalum capacitor u1 HMC437MS8G / HMC437MS8Ge divide-by-3 pcb [2] 105697 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. this evaluation board is designed for single ended input testing. j2 and j3 provide differential output signals. HMC437MS8G / 437ms8ge smt gaas hbt mmic divide-by-3, dc - 7 ghz v04.0410
|
